125KHz RFID Access Control Keypad Outdoor Rainproof Cover EM Card Reader 10pcs Keyfobs For Door Access Control System
Product Features
Classical standalone access control adopts high quality plastic material. Based
on low power consumption and low cost. Suitable for household, office
and department.
* High quality and high security
* Sensitively and response quickly
* Support 1000 standard users
* Support card, password, password plus card to open the door
* Has a door bell button
* Classical Appearance with useful function
* Doesn't need to connect on the computer, can works alone
* Application: Home/ hotel/ office/ department / apartment etc
Product Specifications
User Capicity: 1000 user cards
Dimension: 120mmx78mm×22mm(L×W×H)
Working Frequency: 125KHz
Working Current: <100mA
Working Voltage: DC12
Working Temperature: -10 to +60
Reading Distance: 1-5cm
Relative Humidity: 20%-90%
Three Unlocking Methods
RFID Card or Password or RFID Card+Password
Support 1000 standard users
Support swipe card or password to open the door,can directly drive the electric lock.
Function introduction
1.RFID card induction area
2.Digital/setting area：
0-9 numbers, use the“#" as the
settings key when setting the
password or pressing the door t
o open the door, use it to set the
card or password function.
3.Doorbell button:
Can external doorbell
4.Install the Bottom Plate.
5.Control line socket:
Red line connecting power supply +12V
Black line connection power supply GND
Green line connect power supply PUSH
6.Other sockets:
Used to connect to the devices such as
automatic doors or barrier gate.
Wiring Diagram
Please note the power supply, electric locks, exit button
is not included in the package, need to buy extra.
ACCESS CONTROL MACHINE PROGRAMMING
1. Set the unlocking time:
Press [#]+[6 digit programming password]+Press [2]+Press [XX]+Press [#]
XX means the unlocking time (default 3 seconds),If you want to set the unlocking time for 9
seconds, please press [0]+[9]
2. Modify the personal password:
Step 1: Add a user card:(Press [#]+[6 digit programming password]+Press [5]+Press [1]
+Enter 3-bit user code (001-999)+Swiping RFID card+Press [#],Successfully add RFID
card
Step 2: Open the modify the personal password function:Press [#]+[6 digit
programming password]+Press [1]+Press [2]+Press [#]
Step 3:Open the card personal password unlock:Press
[#]+[6 digit programming password]+
Press [1]+Press [4]+Press [#]
Step 4(Non -programming mode):Long press[#] 3 seconds,toot---- +Swiping RFID card
(Register a successful user card.) +Enter 4 original personal passwords (default 0000)+
Enter 4 new personal passwords,
Successfully modify the personal password.
Note:After press [#] for 3 seconds,toot toot toot, it means that you have not opened the
function of modifying the personal password,please re -operate the step 2.
.
3. Modify the public password:
Press [#]+[6 digit programming password]+Press [3]+4 new public passwords(not support
1234)+Press [#]
4.Add a user card:
Press [#]+[6 digit programming password]+Press [5]+Press [1]+Enter 3-bit user code (001
-999)+Swiping RFID card+Press [#],Successfully add RFID card
Note: The 3-digit user code is a non-repeated number between 001-999. The user code is an
important way to delete the user card after the user card is lost.
When setting a user card continuously, the user code will increase in the form of a continuous
swipe.
5. Add management card:
Press [#]+[6 digit programming password]+Press [5]+Press [3]+Enter 3-bit user code (001
-999)+Swiping RFID card+Press [#],Successfully add management card.
6. Delete user card:
Method 1:Press [#]+[6 digit programming password]+Press [5]+Press [2]+Enter 3-bit user
code (001-999)+
Press [#],Successfully deleted.
Method 2:Press [#]+[6 digit programming password]+Press [5]+Press [2]+Swiping RFID
card(Register a successful user card)+ Press [#],Successfully deleted.
7.Set the anti disassembly alarm function(Close by default):
Close function:Press [#]+[6 digit programming password]+Press [6]+Press [0]]+Press
[#].(Only support some models)
Open function:Press [#]+[6 digit programming password]+Press [6]+Press [1]]+Press [#]
8.Reset:
Press [#]+[6 digit programming password]+Press [8]+[6]+[8]+[6],Reset
successful.
9.Reset programming password:
Short connect J2 forcibly restore factory programmed passwoud,short
circuit J2,then disconnected.
